Upload a CAD file to Worlds
Upload a CAD file and see it in a Worlds scene at its real size: walk around it, open its parts list, hide a part, measure between two points, and cut a section through it.
**Files you can upload**
STEP (.step, .stp) and IGES (.iges, .igs) solids and assemblies; IFC (.ifc) building models; STL and OBJ meshes; 3MF print files; DXF drawings. Up to 100 MB.
DWG is not read yet: in your CAD program, save the drawing as DXF and upload that. FBX is not read here: export the model as glTF (.glb) or OBJ. SolidWorks, Inventor and Fusion files: save the part or assembly as STEP. Revit: export to IFC. SketchUp: export to OBJ, STL or IFC.
**Steps**
1. Open a scene at /worlds, signed in.
2. In the scene panel, under **CAD files**, choose **Upload a CAD file**.
3. Choose the file. For STL and OBJ, which do not record their units, choose the units the file was drawn in (STL is read in millimeters and OBJ in meters unless you choose otherwise).
4. Choose **Upload and convert**. The panel shows the upload, then the conversion on the server; a large assembly can take up to two minutes.
5. The model appears in the scene, standing on the ground beside the subject.
**What you can do with it**
- **Parts:** the list follows the assembly as it was built, with each part's name. Untick a part to hide it; choose a part's name to outline it and see its size.
- **Measure:** choose **Measure**, then click two points on the model. The distance is shown in the units the file was drawn in, with meters beside it.
- **Section view:** tick **Section view**, choose Across, Height or Depth, and move the slider to cut through the model.
**How it is converted**
Curved surfaces in STEP and IGES files are turned into triangles; a larger file gets a coarser setting so it converts in time. Units are read from the file and converted to meters, and the model is stood upright. A model with more than 1,000,000 triangles is simplified until it fits, and the panel says so. Your original file is kept, so it can be converted again later.
A file is refused, with the reason, when it is damaged or not the format its name says, when converting it takes more than two minutes or more memory than a conversion is given, or when it would still be too detailed after simplifying. Upload one part or one building at a time if that happens.
**Who can see it, and where it is stored**
In your personal context, the file is yours alone and counts toward your 5 GB of personal storage. Personal accounts can convert 10 CAD files a day; the count starts again at midnight, your time. Working in an organization, the file goes to the organization: an owner, admin or editor can upload and remove it, every member can see it, and the storage and conversion time are billed to the organization at cost plus 15%.
**Your engineering stays yours**
A CAD file is often confidential. Turtini reads your file only to convert it for you. Nothing scans its contents, nothing extracts text or data from it, and nothing is trained on it. Remove it under **CAD files** and both the original and the converted model are deleted.