Turtini

Measure a home and price it on your phone

1. Open **Painting** and choose **New estimate**. Enter the homeowner, the property address and state, and the year built if you know it.
2. **Add room** for each room: length, width and wall height in feet. **Add exterior elevation** for each side of the house: its wall area in square feet.
3. Enter the doors, windows and garage doors. Their area comes off the walls and siding; door widths come off the trim.
4. Turn on the surfaces you are painting: walls, ceiling, trim, doors, cabinets, siding, fascia and soffit. For each, set coats, prep level, color name, color code, sheen and product line. Cabinets and fascia take a count or linear feet you enter. Any other surface can be entered by hand too.
5. Add photos to each area once the estimate has saved.

The estimate saves as you type. The status pill shows Saving, Unsaved changes or Saved.

**What the numbers are**
- **Labor**: each surface's area times coats, divided by your production rate for that surface and prep level, rounded up to the minute, at your labor cost per hour.
- **Paint**: totaled per color and sheen across rooms, then bought as the cheapest mix of quarts, gallons and 5-gallon pails that covers it.
- **Price**: labor plus paint plus sundries, marked up to your target margin and rounded up to your rounding unit.

The server recalculates every number when the estimate saves, from your saved rates. Anything that cannot be measured, such as a room with no height, is listed under the totals and has to be fixed before a proposal can go out.

Measuring by LiDAR or from photos is not available yet; enter dimensions by hand.