Complete a risk assessment before a flight
Most of the assessment fills itself in from records you already keep. It should take about two minutes.
1. Open **Flight Safety > Assessments > New assessment**.
2. Enter the tail number, departure, destination, alternate, planned departure time and planned altitude. A flight plan route is optional; without one the route is a great-circle line and is labeled that way.
3. Select **Check route weather and NOTAMs** to see the weather products along the route at your altitudes and times, and the NOTAMs at your airports and along the route. You can start without it, but the weather items then score as unknown.
4. Select **Start assessment**. Items that come from records show where the value came from and when. Answer the rest with one tap each.
5. You may raise any answer. To answer lower risk than the records show, write the reason; it is kept and shown to anyone who signs.
6. Select **Submit assessment**. Green is released at once. Amber needs a recorded mitigation. Red needs a mitigation and a second person.
7. When you leave, select **Departed**.
**On the ramp with no signal.** Open the assessment while you still have a connection; a copy is kept on the device. Answers, mitigations and submit taken offline are queued and sent when you reconnect, under your account only, and are not sent if they are more than six hours old. The phone shows a score as you go; the server scores again on submit from the records it holds then, and its score is the record. A second-person signature cannot be collected offline.
The assessment does not decide whether to fly. The pilot in command and your company make that decision.